Intermatic 158ha11645-art User Manual
Replicating the Network and Channel Settings (cont’d)
(Note: If the secondary controller is Home Settings Model
HA09 Handy Remote Controller, follow the same procedure as
the HA07 Master Remote. Instead of seeing the word “COPY”,
the 2 LEDs on the HA09 will flash simultaneously.)
HA09 Handy Remote Controller, follow the same procedure as
the HA07 Master Remote. Instead of seeing the word “COPY”,
the 2 LEDs on the HA09 will flash simultaneously.)
The controllers will automatically synchronize with each other
and the word “SUCCESSFUL” will flash for 2 seconds on the
display (for HA09 Handy Controller, success is indicated with a
solid green LED for 2 seconds). If not successful, the words
“NOT SUCCESSFUL” will be displayed for 2 seconds (for
HA09 Handy Controller, the red and green LED’s will flash for 2
seconds).
and the word “SUCCESSFUL” will flash for 2 seconds on the
display (for HA09 Handy Controller, success is indicated with a
solid green LED for 2 seconds). If not successful, the words
“NOT SUCCESSFUL” will be displayed for 2 seconds (for
HA09 Handy Controller, the red and green LED’s will flash for 2
seconds).
Fig 16a -Press and hold the
Fig 16b - Press and release
INCLUDE button on the
Primary
the Channel 1 ON/DIM button
Controller. “Copy” will be shown
on the Primary Controller. “TA”
in the LCD display. Release the which stands for “Transmit
INCLUDE button.
INCLUDE button.
ALL data” will be shown next to
“Copy”.
“Copy”.
Page 29 of 35