Intermatic 158ha11645-art User Manual

1. Modules should be plugged-in or hardwired into the

location where they will be used. 

2. For best results, do not move or relocate modules after 

they have been included into the network. If you wish to
re-locate or move a module from a particular location,
first delete it from the network, then include it back to
the network after you have re-located it.

3. Devices should be plugged into modules before adding

modules to the network.  Devices (for example, lamps) 
should be turned to the ON position.

4. Controllers must be brought within 6 ft. of modules 

during set-up. This is because during 

set-up, the 

controller communicates with the modules using low
radio transmission power. This helps provide additional 
security when setting up your network.

5. HA06 Dimmer Switches have a 40-Watt minimum lamp 

requirement.

Page 7 of 35