Campbell Hausfeld RP3175 User Manual
2
Operating Instructions
RP3175
www.chpower.com
Operation
For use with 12-volt
DC power outlets
rated 10 amps or higher. Do not use
with older 8 amp cigarette lighter
receptacles.
with older 8 amp cigarette lighter
receptacles.
Overinfl ation can be dangerous.
Pay attention while infl ating
low pressure items to prevent
overinfl ation.
TIRES
1. Remove valve stem cap.
2. Attach the universal adapter (see
Figure 2) from the inflator to the
valve stem with the lever in the up
position. Be sure to press universal
adapter down over valve stem
threads completely. When universal
adapter is firmly in place, press
locking lever down to lock onto
valve stem.
valve stem with the lever in the up
position. Be sure to press universal
adapter down over valve stem
threads completely. When universal
adapter is firmly in place, press
locking lever down to lock onto
valve stem.
3. Plug power cord into power outlet.
4. Turn on inflator until desired
pressure is reached.
5. Check that the tire pressure is
correct.
INFLATABLES
1. Push flexible plastic hose onto high
volume air outlet located on side of
inflator.
inflator.
2. Place end of hose into opening of
inflatable using the appropriate
nozzle.
nozzle.
3. Plug power cord into power outlet.
4. Turn on inflator.
5. Once object being filled is firm, turn
off inflator.
User - Maintenance
Instructions
Instructions
FUSE REPLACEMENT
NEVER replace a blown fuse with a fuse
having a higher rating.
having a higher rating.
1. Unscrew end of plug counter-
clockwise to remove fuse.
2. If fuse is blown, replace with a new
10-amp fuse. Always replace a blown
fuse with the same size fuse.
fuse with the same size fuse.
3. Reassemble plug. Do not
overtighten.
TECHNICAL SERVICE
Please call our Tool Hotline at 1-800-
543-6400 with any questions regarding
the operation or repair of this unit or
for additional copies of this manual.
543-6400 with any questions regarding
the operation or repair of this unit or
for additional copies of this manual.
UNIT REPAIR
Only qualified personnel should repair
the unit and they should use genuine
Campbell Hausfeld replacement parts
and accessories, or parts and accessories
which perform equivalently.
the unit and they should use genuine
Campbell Hausfeld replacement parts
and accessories, or parts and accessories
which perform equivalently.
STORAGE
The unit should be stored in a cool dry
place.
place.
Do not leave the
infl ator unattended
while the unit is running.
Never
exceed
the recommended pressure
for any infl atable object. Do
not over infl ate objects. Over
infl ation could cause property damage
and/or personal injury.
for any infl atable object. Do
not over infl ate objects. Over
infl ation could cause property damage
and/or personal injury.
The
universal
adapter must
be locked to secure the infl ation
accessories. Use extreme caution when
using infl ation accessories.
accessories. Use extreme caution when
using infl ation accessories.
Always put the car
in park; set the
emergency brake; and chock the wheels
before using the infl ator or property
damage and/or personal injury could
occur.
before using the infl ator or property
damage and/or personal injury could
occur.
Always use a
separate
pressure
gauge to check the actual pressure in
tires and in low pressure infl atable
objects.
tires and in low pressure infl atable
objects.
Infl ator must cool
for 20 minutes after
20 minutes of continuous oper-ation.
The Infl ator is not designed to operate
continuously for more than 20 minutes.
The Infl ator is not designed to operate
continuously for more than 20 minutes.
Do not use infl ator
on high pressure
tires used on large trucks, trailers or
tractors. The infl ator is not designed to
operate for the length of time necessary
to infl ate these tires.
tractors. The infl ator is not designed to
operate for the length of time necessary
to infl ate these tires.
Make sure the
universal
adapter
touches the core or tire valve stem.
Important Safety Instructions
(Continued)
(Continued)
Figure 2
Universal Adapter
Open
Lock
Valve Stem