Bay Technical Associates BayTech DS72 User Manual
DS72 Host Module
25
Break Length
Users may configure the Host Module for a break length of 1 - 1000 milliseconds. When a user,
running a Telnet session with the Host and connected to a serial port on a DS74, sends a Telnet break
command (0xF3) to the Host Module, the serial port will send a break signal of the programmed
duration. Default is 350 milliseconds.
running a Telnet session with the Host and connected to a serial port on a DS74, sends a Telnet break
command (0xF3) to the Host Module, the serial port will send a break signal of the programmed
duration. Default is 350 milliseconds.
DHCP/Telnet/BootP
Dynamic Host Configuration Protocol (DHCP) is a communications protocol that lets network
administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an
organization's network. Default setting is disabled.
administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an
organization's network. Default setting is disabled.
Telnet is a user command and an underlying TCP/IP protocol for accessing remote devices. On the
Web, HTTP and FTP protocols allow you to request specific files from remote computers, but not to
actually be logged on as a user of that computer. Default setting is enabled.
Web, HTTP and FTP protocols allow you to request specific files from remote computers, but not to
actually be logged on as a user of that computer. Default setting is enabled.
NOTE: Changing this setting will logout all SSH and Telnet sessions
Bootstrap Protocol (BOOTP) is a protocol that enables the unit to obtain an IP Address from a BOOTP
server. Default setting is enabled.
server. Default setting is enabled.
Unit ID
This option allows the admin users to change the Host Module’s name.
Carriage Return Translation is.... Enabled
Enable ? (Y/N), CR for no change) :
Enable ? (Y/N), CR for no change) :
Break Length is (msec)............ 350
Enter break length, in milliseconds (<=10000, 0 to disable) :
Enter break length, in milliseconds (<=10000, 0 to disable) :
DHCP is...........................Disabled
Enable ? (Y/N), CR for no change) :
Enable ? (Y/N), CR for no change) :
Telnet is.........................Enabled
Enable ? (Y/N), CR for no change) :
Enable ? (Y/N), CR for no change) :
BOOTP is.........................Enabled
Enable ? (Y/N), CR for no change) :
Enable ? (Y/N), CR for no change) :
Unit ID is: DS72
Enter Unit ID (64 chars max).
: DS72 Desk Test
: DS72 Desk Test