Jacuzzi j-300 j-345 User Manual

Page of 64
31
J-300
An optional chemical feeder is available through your  
authorized Jacuzzi dealer that installs under the filter cap 
(#2472-673). Always remove the chemical feeder cap and 
feeder (when used) during the filter cleaning process by 
turning the cap handle counterclockwise. Reinstall the cap 
and feeder back onto the filter cartridge after the filter 
cleaning process is complete. It is recommended that latex 
gloves be used to avoid touching the chemical feeder 
during the filter cleaning process. 
note: When used, the chemical feeder MUST remain on the circulation 
pump filter cartridge! This filter cartridge is the one with the grid across 
the wall fitting as shown (right).
to DeCrease risk oF Death, Drowning or entraPMent, 
alwaYs Turn power To spa oFF BeFore CleanInG THe 
FIlTer CarTrIDGes! 
note: Refer to steps A-J on following page for complete filter cleaning/
replacement instructions.
a
   
DanGer:
 Turn power To spa oFF! To DeCrease 
risk oF Death, Drowning, or entraPMent, never 
operaTe spa wHen FIlTer Is noT properlY InsTalleD 
or IF sKImmer assemBlY Is DamaGeD or alTereD!
B
Lift cover approx. 3/8" to 
unclip, then tilt forward to 
access filter cartridges.
C
(Filter Cover Back View)
Remove skimmer bag 
from clips, then clean out 
debris.
D
Rotate each filter 
cartridge handle 
counterclockwise to 
unthread from mating 
wall fitting.