Chaney Instrument model 03112 professional milk frothing thermometer User Manual
03112
Espresso Thermometer
Should this product from Chaney
Instrument Co. prove to be defective
in material or workmanship within one
year of original purchase, it will be
repaired or replaced. This warranty
does not cover damage in shipment
or failure caused by tampering,
carelessness or abuse.
LIMITED WARRANTY
LAKE GENEVA, WI 53147
www.chaneyinstrument.com
0
°-220°F Temp Range 1 3/4” Dial 7” Stainless Steel Stem
Waterproof & Dishwasher Safe AdjustablePan Clip Pocket Sheath
INSTRUCTIONS FOR USE:
1. Clip to side of pan. Place tip of thermometer at least 2 1/2” into milk.Do not let
1. Clip to side of pan. Place tip of thermometer at least 2 1/2” into milk.Do not let
thermometer tip touch bottom or sides of pitcher. Then heat the milk to the desired
temperature, normally between 140
temperature, normally between 140
°F - 160°F.
2. To obtain accurate temperature reading wait until dial stops moving, 5-10 seconds.
3. Wash probe with hot, soapy water after each insertion to prevent cross-contamination.
3. Wash probe with hot, soapy water after each insertion to prevent cross-contamination.
To adjust the height of the thermometer clip, pinch the clip with your thumb
and forefinger in the areas shown in the diagram to the left. Slide the
thermometer stem up or down to reach the desired position, then release.
and forefinger in the areas shown in the diagram to the left. Slide the
thermometer stem up or down to reach the desired position, then release.
RECALIBRATION:
To check thermometer for accuracy, immerse probe 2" into
boiling water (212
To check thermometer for accuracy, immerse probe 2" into
boiling water (212
°F). Allow 30 seconds before adjusting. Without
removing probe, grip adjusting nut with suitable tool and rotate
thermometer to correct error.
thermometer to correct error.
WARNING:
DO NOT use in oven, rotisserie, or microwave.
DO NOT use in oven, rotisserie, or microwave.