Contec SPI-8451-LLVA User Manual
8. BIOS Setup
98
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
Description Choice
Power after PWR Fail
Select a Power On status by the BIOS setup when
power fails. When use ATX power supply and the
setup jumper on the back plane is “AT mode”, select
this setting is “on”.
Select a Power On status by the BIOS setup when
power fails. When use ATX power supply and the
setup jumper on the back plane is “AT mode”, select
this setting is “on”.
CPU THRM-Throttling
To select throttling ration for CPU speed down active
when CPU temperature up to over specification.
To select throttling ration for CPU speed down active
when CPU temperature up to over specification.
Wake up by PCI card
When Enabled, your can awakens the system from
Suspend mode from PCI card event.
When Enabled, your can awakens the system from
Suspend mode from PCI card event.
Power On by Ring
An input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem)
awakens the system from a soft off state.
An input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem)
awakens the system from a soft off state.