Cadillac cts User Manual

Push forward on the turn signal/multifunction lever to
change the headlamps from low to high beam. Pull the
lever back and then release it to change from high to 
low beam.

This light on the instrument
panel cluster will be on,
indicating high

-

beam usage.

A warning chime will sound if the exterior lamp control
is left on in either the headlamp or parking lamp
position and the driver’s door is opened with the 
ignition off.

This feature allows you to use the high

-

beam headlamps

to signal the driver in front of you that you want to pass.

Pull and hold the turn signal/multifunction lever toward
you to use. When you do, the following will occur:
D If the headlamps are either off, in low

-

beam or in

Daytime Running Lamps (DRL) mode, the
high

-

beam headlamps will turn on. They’ll stay on

as long as you hold the lever there. Release the lever
to turn them off.

D If the headlamps are in high

-

beam mode, they will

switch to low beam. To return to high

-

beam, push

the lever away from you.