Cadillac cts User Manual

2-54

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when
you’re not using cruise, you might hit a button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch off until you want to use
cruise control.

1. Press the cruise control on/off button to turn cruise

control on. An indicator light will come on to show
that the cruise control is on.

2. Accelerate to the speed you want.

3. Press either the plus or minus button and release it.

This will set the cruise control.

4. Remove your foot from the accelerator pedal.

This light on the instrument
panel cluster will come on
when cruise control is on.
It will go out when cruise
control is turned off.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed
and then you apply the brake. This shuts off the cruise
control. But you don’t need to reset it.

Once the vehicle is traveling approximately 25 mph
(40 km/h) or more, you can press the resume/accelerate
button to return to your desired preset speed. The cruise
control light will be displayed again.

The vehicle will return to and stay at your preset speed.
If you press and hold the resume/accelerate button, the
vehicle speed will increase until you release the button
or apply the brake. Unless you want to go faster, do not
press and hold the resume/accelerate button.