Cadillac cts User Manual

If an error occurs while trying to play a cassette tape, it
could be that one of the following has occurred:
D The cassette tape is tight and the cassette player

cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and try turning the right
hub counterclockwise with a pencil. Flip the tape
over and repeat. If the hubs do not turn easily, your
cassette tape may be damaged and should not be
used in the player. Try a new tape to be sure your
player is working properly.

D The cassette tape is broken. Check to see if your tape

is broken. Try a new tape.

CLEAN TAPE: If this message appears on the display,
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player” in the Index.

If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer.

Your cassette tape player automatically reduces
background noise. Dolby Noise Reduction is
manufactured under a license from Dolby Laboratories
Licensing Corporation. Dolby and the double

-

D symbol

are trademarks of Dolby Laboratories Licensing
Corporation.

Auto CrO

2

 allows the cassette tape player to adjust to

the type of cassette tape for clearer sound for CrO

2

cassette tapes.

Insert a disc partway into the slot, label side up. The
player will pull it in. If the ignition and the radio are on
the disc will begin playing. The display will show a CD
symbol. CD and the track number will appear on the
display when a CD is playing. A compact disc may be
loaded with the radio off but it will not start playing
until the radio is on.

The integral CD player can play the smaller 8 cm
compact discs with a 12 cm adapter. Full

-

size compact

discs and the smaller compact discs (with the 12 cm
adapter) are loaded in the same manner. See you dealer
for more information about the 12 cm adapter for using
8 cm discs.