Cadillac cts User Manual

A. Turn Signal Lamp

B. Fog Lamp

To replace the front turn signal or fog lamps, use the
following procedure:

1. Remove the protection shield located on the

underside of the front of the vehicle by pulling out
the push

-

pins located on the underside of the

protection shield.

2. Reach up behind the front bumper area from under

the vehicle to access the lamp housing.

3. Remove the bulb socket from the housing by turning

the bulb socket one

-

quarter turn counterclockwise.

4. Remove the electrical connector from the bulb by

lifting the two plastic clips.

5. Pull the old bulb from the bulb socket keeping the

bulb straight as you pull it out.

6. Install a new bulb.

7. Reverse the steps to reinstall the lamp assembly.

It is recommended that this component be replaced as a
unit. See your dealer.