Cadillac cts User Manual

To reinstall the rear seat cushion, do the following:

1. Position the seat cushion so that you can route 

the safety belts through the proper slots in the 
seat cushion.

2. Slide the rear of the cushion up and under the

seatback so the rear

-

locating guides hook into the

wire loops on the back frame.

3. With the seat cushion lowered, push rearward and

then press down on the seat cushion until the seat
cushion snaps into place.

4. Push and pull on the seat cushion to make sure it is

locked into place.

5. Check to make sure the safety belts are properly

routed and that no portion of any safety belt is
trapped under the seat cushion.

The driver’s side rear fuse block is located under the
rear seat on the driver’s side of the vehicle. The rear 
seat cushion must be removed to access the rear fuse
block. See “Removing the Rear Seat Cushion” 
listed previously.

To access the fuse block, push in the two tabs located at
each end of the fuse block cover. Then lift the cover off.