Cadillac cts User Manual

This feature allows you to program and recall memory
settings for the driver’s seating and outside rearview
mirror driving positions for up to two drivers.

The buttons for this feature
are located on the driver’s
door armrest.

Use the following steps to program the buttons:

1. Adjust the driver’s seat including the seatback

recliner and both outside mirrors.

2. Press and hold button 1 for at least three seconds.

Two beeps will sound to confirm that the seat and
mirror positions have been saved.

3. Repeat the procedure for a second driver 

using button 2.

If your vehicle has an automatic transmission, the
vehicle must be in PARK (P) to recall the stored driving
positions. If your vehicle has a manual transmission and
the engine is running, the parking brake must be set to
recall the memory seat driving positions. The stored
driving positions can be recalled without setting the
parking brake if the vehicle is off.

Press one of the numbered memory buttons to recall the
stored setting. Each time a memory button is pressed, a
single beep will sound.

Three chimes will sound and the setting will not be
recalled if you press button 1 or 2 while the engine is
running and the vehicle is not in PARK (P) on an
automatic transmission or the parking brake is not 
set on a manual transmission.

If you would like the stored driving positions to be
recalled when unlocking your vehicle with the remote
keyless entry transmitter or when you place the key in
the ignition, see “Vehicle Programming and
Personalization Features” in the Index.

To stop recall movement of the memory feature at any
time, press one of the power seat or mirror controls.