Cadillac deville 2005 User Manual
6. Turn the vertical aiming
screw (C) until the
headlamp beam
is aimed to the
horizontal tape line.
The top edge of
the cut-off should be
positioned at the
bottom edge of the
horizontal tape line.
headlamp beam
is aimed to the
horizontal tape line.
The top edge of
the cut-off should be
positioned at the
bottom edge of the
horizontal tape line.
7. Repeat Steps 4 through 6 for the opposite headlamp.
Bulb Replacement
For the proper type of replacement bulbs, see
Replacement Bulbs on page 5-56.
Replacement Bulbs on page 5-56.
For any bulb changing procedure not listed in this
section, contact your dealer.
section, contact your dealer.
Halogen Bulbs
{
CAUTION:
Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
Headlamps
1. Remove all of the
push-pins that hold the
filler panel cover in
place by pressing in the
center of each pin
and then pulling up on
the outer circle.
filler panel cover in
place by pressing in the
center of each pin
and then pulling up on
the outer circle.
5-51