Fujitsu image scanner fi-5950 User Manual

3

■ Indications on the Function 

The following shows the indications on the Function 

Number Display.

Use this button to start linked applica-

tion.
When this button is pressed during 

scanning operation, the scanning is 

cancelled
(*About the settings, refer to the "fi-

5950 Operator’s Guide" on the SETUP 

DVD-ROM).
Use this button to turn the power ON/
OFF.

When the power is turned on, the but-

ton is illuminated in blue.

HINT

Operator Panel Overlays are available in 
French, German, Italian, Spanish, and Chi-
nese (Simplified). To change the overlay, 
open the plastic cover. 

Lights only one time upon turning on the scanner.

Indicates that the scanner has been turned ON 

and is being initialized.

Indicates that initialization has been completed 
successfully.

This status is called "Ready Status." 

or

Indicates that a temporary error (that users can 

solve) has occurred during the initialization or 
scanning of documents.

"J" or "U" and an error number (1, 2, 4, 6, 8, 0) 

are displayed alternately.
To return the scanner to the ready status ("1"), 

press the "Scan" or "Send to" button while the 

error is indicated.
Indicates that a device alarm (that users can not 
solve) has occurred during the initialization or 

scanning of documents.

"E" and an alarm number (0, 2 to 9, and A, c, d, 
F, 10 to 12, 15 to 19, 1A, 1b) are indicated alter-

nately.

To return the scanner to the ready status ("1"), 
press the "Scan" or "Send to" button.

If this alarm occurs, turn the power off and then 

on again. If the alarm is indicated after turning on 
the power again, contact your service engineer.