FMI (v)g42hr-50hr User Manual
www.fmiproducts.com
109493-01R
14
WARNING: Fireplaces
equipped with glass doors
should be operated only with
doors fully opened or doors fully
closed. Doors, if left partly open,
may draw gas and flame out of
the fireplace opening creating
risks of both fire and smoke.
Cleaning Glass
Clean glass with any commercial glass
cleaner or soap and water. Do not use any
abrasive material to clean glass. Do not clean
glass with any cool water if glass is still hot
from the fire and smoke.
A gas line or gas log lighter may be installed
A gas line or gas log lighter may be installed
for the purpose of installing a vented or vent-
free decorative gas appliance incorporating an
automatic shutoff device and complying with
the Standard for Decorative Gas Appliances
for Installation in Vented Fireplaces, ANSI
Z21.60 or American Gas Association draft
requirements for Gas Fired Log Lighters for
Wood Burning Fireplaces, Draft NO. 4 dated
August, 1993.
If you wish to install an unvented (vent-free)
If you wish to install an unvented (vent-free)
gas log set, only unvented gas log sets which
have been found to comply with the standard
for unvented room heaters, ANSI Z21.11.2 are
to be installed in this fireplace.
OUTSIDE AIR AND DAMPER
HANDLE OPERATION
The damper handle, which opens and closes
the damper blade, is located in the upper front
face of the fireplace. Pushing the handle for-
ward and up through the keyway slot will free
damper blade to automatically open. Pushing
the handle forward and down will lock damper
blade closed (see Figure 25).
The outside air kit lever is located at the left
The outside air kit lever is located at the left
and right hand sides of fireplace (see Figure
26). Lifting lever up will free the outside air
door to open. Pulling lever down will lock
the door.
operaTion and MainTenance guidelines
Continued
Figure 25 - Operating Damper Handle
Damper
Weight
To Close
Damper
To Open
Damper
Damper
Weight
Open Position
Closed Position
Figure 26 - Outside Air Kit Lever
WARNING: Risk of fire!
Replace grate with FMI PROD-
UCTS, LLC model 109496-01
(42" Models) or 109496-02 (50"
Models) grate only. This grate
has been designed to keep the
operation of your fireplace safe
and efficient.