Lumiscope model 1092 User Manual
8
Description of Display Marks
Pulse could not be
measured.
Repeat the measure-
ment without moving
the arm.
DISPLAY MARK
CONDITION/CAUSE
CORRECTIVE ACTION
Pulse could not be
measured accurately.
The cuff was inflated to
more than 280 mmHg.
Pressurization is not pos-
sible. The wrist cuff was
not wrapped properly.
Exhaust the air from
the cuff.
The arm moved during
measurement.
Batteries are weak.
There is a problem with
the device.
There is a problem with
the unit.
After rewrapping the
cuff, repeat measure-
ment.
After rewrapping the cuff,
conduct the measurement
without moving.
Repeat the measure-
ment without moving
the arm.
Replace the batteries.
Return to Lumiscope
service Department.
Return to Lumiscope
Service Department.