Bil-Jax b33-01-0078 User Manual

9.  During floor travel and lift operations, the alarm beeper should sound. If the 

alarm beeper does not work properly, do not operate the lift vehicle. 

10.  During lift platform descent, the amber caution light should blink on and off. If 

the caution light does not blink on and off, do not use the lift vehicle. 

11.  If any equipment motion continues after the pushbutton, joystick, or selector 

switch is released, press the 

EMERGENCY STOP

 pushbutton, Figure 3-2. All 

equipment motion should stop immediately. 

12.  At the end of each workday and whenever a low battery charge level is indi-

cated, transport the lift vehicle to the recharge site and plug in the charge cord. 
Verify that the 

ON-CHARGING

 indicator lights up on the battery charger. 

13.  To shut down the equipment, turn the 

UPPER CONTROL/OFF/LOWER CONTROL

 key 

switch and the 

BATTERY ON/OFF

 switch to 

OFF

. Remove the key to prevent unau-

thorized equipment operation.