FMI pfs vp325e(b) User Manual

Page of 32
www.fmiproducts.com
108794-01G
20
CleANING ANd mAINteNANCe
 WARNING: Installation and 
repair should be done by a quali-
fied service person. The appli-
ance should be inspected before
each use and at least annually 
by  a  qualified  service  person.
More frequent cleaning may be
required  due  to  excessive  lint
from carpeting, bedding mate-
rial, pet hair, etc. It is imperative
that the control compartments,
burners and circulating air sys-
tem be kept clean.
WARNING: The logs can be
hot. Handle only when cool.
 WARNING: Turn off gas and 
electrical power before servicing
appliance.
WARNING: Failure to keep
the  primary  air  opening(s)  of
the burner(s) clean may result in
sooting and property damage.
PILOT AND BURNER
•  Remove logs and ember material before 
cleaning burner and replace when cleaning 
is complete.
•  Burner  and  controls  should  be  cleaned 
with compressed air to remove dust, dirt 
or lint.
•  Use a vacuum cleaner or small, soft bristled 
brush to remove excess dust, dirt or lint.
LOGS
•  If  you  remove  logs  for  cleaning,  refer  to 
log placement information on page 14 to 
properly replace logs.
•  Use  a  vacuum  cleaner  to  remove  any 
carbon buildup on logs.
•  Replace log(s) if broken. See Replacement 
Parts.
•  Replace  ember  material  periodically  as 
needed. See Replacement Parts.
rePlACemeNt PArts
Note:  Use  only  original  replacement  parts. 
This will protect your warranty coverage for 
parts replaced under warranty.
Contact  authorized  dealers  of  this  product. 
If  they  can’t  supply  original  replacement 
part(s), call FMI PRODUCTS, LLC at 1-866-
328-4537.
When calling, have ready:
•  your name
•  your address
•  model and serial numbers of your heater
•  how heater was malfunctioning
•  purchase date
Usually, we will ask you to return the part to 
the factory.
serVICe HINts
When Gas Pressure Is Too Low
•  pilot will not stay lit
•  burner will have delayed ignition
•  fireplace will not produce specified heat
•  propane/LP gas supply may be low if using 
propane/LP gas
If using propane/LP gas, you may feel your 
gas pressure is too low. If so, contact your 
local propane/LP gas supplier.
teCHNICAl serVICe
You may have further questions about instal-
lation,  operation,  or  troubleshooting.  If  so, 
contact FMI PRODUCTS, LLC at 1-866-328-
4537. When calling please have your model 
and serial numbers of your heater ready.
You can also visit our web site at 
www.fmiproducts.com.