Haier lr47t1 User Manual

External Equipment Connections

DVD Setup

1

. Connect the DVD video outputs (Y, Pb/Cb, 

Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) 
input jacks on the TV and connect the DVD 
audio outputs to the AUDIO jacks on the TV, 
as shown in the figure.

2

. If your DVD only has an S-Video output jack, 

connect  this to  the S-VIDEO input on the TV 
and Connect the DVD audio outputs to the AV IN 
jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have 
component video output, use S-Video.

1

. Turn on the DVD player, insert a DVD.

2

. Use the S-Video button on the remote 

control to select S-VIDEO or YPbPr/YCbCr
mode.

3

. 

Press Play button on external equipment 

for program play.

4

. Refer to the DVD player's manual for 

operating instructions.

HDMI or DVI Setup

-To watch digitally broadcast programs, 
purchase and connect a digital set-top 
box.

Use the TV`s COMPONENT (Y, Pb/Cb, 
Pr/Cr) IN jacks, VGA or HDMI port for 
video connections, depending on your 
set-top box connections available. 
Then, make the corresponding audio 
connections.

1

. Turn on the digital set-top box. 

(Refer to the  owner`s  manual for the digital set-top box.)

2

. Use TV/AV on the remote control to select VGA or HDMI

(Y, Pb/Cb, Pr/Cr) mode.

3

. 

Press Play button on external equipment for program play.

11

DVD

or