Grizzly h8090 User Manual

MODEL H8090

2 Ton

Mini Aluminum Jack

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JC8821 PRINTED IN CHINA

Specifications

Maximum Lifting Capacity ............................ 4000 lbs.
Lifting Range ............................................. 5

⁄

"–13

⁄

Weight .............................................................. 21 lbs.

Identification

Figure 1 shows the main parts of the jack.

Figure 1. Model H8090 Identification.

Figure 2. Pump control knob, pump arm notch and

pump arm socket.

Carrying

Handle

Saddle

If you need help with the Model H8090, call our
Technical Support line at: (570) 546-9663.

1. ALWAYS support the vehicle with appropri-

ately rated support stands before using this
jack.

2. Only use this jack on hard level surfaces

such as concrete or asphalt.

3. DO NOT overload this jack beyond the

maximum lifting capacity. Overloading can
cause the jack to collapse.

4. DO NOT use this jack to move a vehicle.

This jack is designed for lifting only.

5. Keep fingers and hands away from pinch

points when lowering

6. Always block vehicle wheels before using

this jack.

Pump Control

Knob

Pump Arm Notch

Machine

Label

Pump Arm

Socket

Failure to follow these instructions could result
in serious personal injury or death:

To raise the saddle:

Fit the pump arm notch over the pump con-
trol knob and turn the knob clockwise until it
stops, then put the pump arm into the socket
and move the arm up and down (

Figure 2).

To lower the saddle:

Fit the pump arm over the control knob and
slowly turn the knob counterclockwise.

Operation