GE ZTD910 User Manual

3

Design Information

30” Wide model

27” Wide model

ZTD910

30”

ZKD910

26-3/4”

The warming drawers may be installed
directly into a wall or wall oven cabinetry,
or below a countertop.

ZXD27B, ZXD30B – This kit provides for the
installation of a custom front panel on 27”
and 30" black and white wide models.

 The original drawer front will be removed and discarded

when this kit is used. The tubular handle can be reinstalled onto

the custom panel with longer screws (not provided). Or, the

original handle can be replaced with a custom handle 

of your

choice. (Handle is not supplied.) Choose a custom handle to match
or complement cabinetry hardware.

• Wood screws and adhesive or other hardware for installing

runners or shelf to support warmer drawer.

• 2 x 4  or 2 x 2 lumber for runners

• 2 x 4 or 2 x 2 wood block for anti-tip security

• Saw

• Level

• Drill and 1/16” bit

• Phillips screwdriver

Runners must be level, rigidly mounted and capable of supporting

150 pounds.

26"

Including

Handle

23-1/4"

A

10-1/2"

9"

1"

Drawer

Open

27"

JXPN1 – Warming drawer pan kit. This kit
includes supports and a set of 5 pans which fit
into 27" and 30" models.

JXPN2 – Warming drawer pan kit. This kit
includes supports and a set of 3 pans which fit
into 27" and 30" models.