Fujitsu sparc t5120 User Manual

This guide describes the minimum steps you must perform to power on and boot your server for the first time 
using the preinstalled Solaris™ Operating System (Solaris OS). 

SPARC Enterprise T5120 Server

For quick installation and configuration, follow these steps. For more detailed information, refer to the complete 
online product documentation set at: 

http://www.fujitsu.com/sparcenterprise/manual/

Understand the following information before you set up the server for the first time:

■

– This system includes a service processor (SP) that is used to 

configure and boot the host server. To properly configure the host server and view SP messages, do not apply 
AC power to the server until the SP and host networking connections are made, as described in this guide.

■

 – The quick setup instructions in this guide work for any 

networking environment, and require the use of a terminal device for connection to a serial port. If you have 
a networking environment running DHCP, you can configure your system using the Ethernet management 
port. To take advantage of the DHCP setup method, refer to the online installation guide in the online product 
documentation set at: 

http://www.fujitsu.com/sparcenterprise/manual/

1

Server

2

RJ-45 Ethernet cable 

1

RJ-45 to DB-25 adapter (crossover)

1

RJ-45 to DB-9 adapter (crossover)

1

Wrist strap

2

Power  cords  (packaged  separately)

1

Rackmounting kit with cable 
management assembly

SPARC

®

 Enterprise T5120 Server Getting Started Guide