Fujitsu fs-1108au-fs1108mu User Manual

 

 

When a cascade connection is used for a KVM Switch (maximum configuration: 1 master KVM 

Switch, 8 slave KVM Switches), up to 64 servers can be connected. 

For cascade connections with a previous model, the latest KVM Switch or a previous model 

can be operated regardless of which is on the master or slave side. 

 

(1) Use steps 1 to 4 as described in [10-1-1. When a Cascade Connection is not Used 

(level 1 connection)] to connect from 1 to 8 servers using the ports (1) for connecting 
the servers for level 2 (slave).   

(2) Connect the dedicated cable (2) (must be ordered separately) from the port for 

connecting servers from level 1 (master) to the [CONSOLE] port from level 2 (slave). 

 

*Note. Dedicated PS/2:1.8m cables are required for master and slave connections. 

 
(3) If the slave side is to expanded, repeat the procedures described in steps 1 and 2. 
 

*Note. Level 3 connection cannot be performed. 

 
(4) Using the same procedure, connect the remaining ports (3) of level 1 (master) that are 

for connecting to servers to the other servers. 

 

(5) Connect the keyboard, mouse, and monitor to the [CONSOLE] ports (4) of level 1 

(master). Even if these devices are connected to both the PS/2 and USB, only the USB 
side operates. Do not connect a keyboard or mouse to USB ports on the slave side.   

(6) Connect the power cable (5) to the KVM Switch and the power outlet. Connect the 

power cable of the master side to the power outlet first. 

(7) Turn on the power of the monitor, and press the [RESET] switch on the master side to 

read the EDID information of the monitor to the KVM Switch. 

(8) Turn on the power of the servers that are to be used.