Fujitsu fs-1108au-fs1108mu User Manual

 

 
(6) Start the server and write the EDID data. 

 
 

 
 

 

 
 
 
 
 
 
 
 
     

When the <N> key is pressed 

When the <P> key is pressed 

 
 
 
 
 
 
 
 
 

 

 
 
 
  Erasing Composite Flags 
        Composite Sync Signals are not supported by KVM Switches. If EDID data of a composite 

monitor is sent to a server, the server may output a Composite Sync Signal. 

        To prevent a Composite Sync Signal from being output, perform the procedures in "9.4.3 Plug 

and Play Data (EDID Data) Settings" to automatically convert EDID data and to disable the 
Composite Sync Signal. 

 
        The EDID data can also not be converted by following the procedure below. 
 

(1) Enter MODE-1 of the Hotkey mode. 
(2) Press <N> or the right button of the mouse to enter the Customer mode. 
(3) Move the cursor to DEFAULT MONITOR (default setting) and press <ENTER> and 

<SHIFT> or press <SHIFT> and the central mouse button at the same time. When 
either of these actions is performed, "SCANNING" is displayed, the KVM Switch 
reads the EDID data from the monitor that is connected to the [CONSOLE] port and 
sets the EDID data. 

MONITOR TYPE: EDID setting mode 
VER.: The current F/W version