Fujitsu fs-1108au-fs1108mu User Manual

 

 

 

 
 

 
This device adheres to the safety regulations related to information processing equipment such as 
electronic office machines that are used in an office environment. If you have any questions please 
contact your FUJITSU COMPONENT sales representative. 
 
 
● To prevent extreme bumping or shaking when moving a KVM Switch, use the original shipping 

container or a box similar to it. 

● During installation and before using a KVM Switch, carefully read [9. Installation] and the section 

about environmental conditions in [12.Specifications] to use the KVM Switch correctly. 

● Take power from a power outlet that constantly provides power without being interrupted by 

switches. 

● Moving a KVM Switch from a cold environment to the installation location may cause condensation 

to occur. 
Before using a KVM Switch, allow it to dry out completely and to reach the ambient temperature of 
the installation location. 

● Lay cables in an area where they will not become damaged. Refer to the relevant sections in [10. 

Cable connection and removal] when plugging or unplugging the cables. 

● Do not connect or remove cables during thunderstorms. 
● Do not allow foreign substances (such as necklaces and clips) or liquids inside KVM Switches. 
● In an emergency (device or parts failure: damage caused by liquid or foreign objects in the KVM 

Switch), remove all cables from the KVM Switch as soon as possible and contact your FUJITSU 
COMPONENT sales representative. 

● Only licensed engineers can repair a KVM Switch. Any unlicensed user that opens a KVM Switch 

and makes incorrect repairs may cause electric shock or fire. 

● Always hold the connector portion and do not jerk the cables when removing them. 
● Avoid operating a KVM Switch or unplugging connectors with wet hands. 
● Do not place any unnecessary items (such as a cup) on top of a KVM Switch. 
● Only licensed personal can uncouple, remove, or replace parts (such as electro-magnetic wave 

devices) which bear a warning mark (such as a lightning bolt). 

● To prevent interference, it is necessary to adequately isolate the data cables that are connected to 

peripheral equipment. 

● Keep this manual with the KVM Switch. If you give the KVM Switch to a third party, also give them 

this manual. 

 
 

 

● Using a cascade connection with previous KVM Switch models 

 
For cascade connections with previous KVM Switch models, even though a cascade connection 
is possible by using the previous KVM Switch model as the master or slave side, restrictions 
may apply to functions with some models.