Dacor RR30NIFS[-C] User Manual
4
Product Specifications
1” (2.5 cm)
Front of open door
Front of handle
Front panel
Rear of front panel
Front of handle
Front panel
Rear of front panel
Backguard thickness
3” (7.6 cm)
backguard*
External handle
shown, some models
have integral handle
(see inside cover)
6” (15.2 cm)
backguard*
*
See table for compatibility
Product width:
29 15/16” (76.0 cm)
35”
(88.9 cm)
to
37”
(94.0 cm)
9” (22.9 cm)
backguard*
A
B
C
D
RR30NI[F]S:
3/8” (9.5 mm)
thick top trim
RR30N[F]S:
full stainless
steel side panels
RR30NI[F]S:
3” (7.6 cm)
partial stainless
steel side panels
(removable)
Product tolerances: ±1/16” (±1.6 mm), unless otherwise stated
Product Dimensions
**Models RR30NIS and RR30NIFS come equipped from the factory with a flat
stainless steel trim piece in place of a backguard. A backguard may be purchased
as an optional accessory. Add an additional 1/16 inch to the depth dimensions
above when installing a backguard on models RR30NIS and RR30NIFS.
The trim on models RR30NS and RR30NFS are not compatible with a raised vent.
The trim on models RR30NS and RR30NFS are not compatible with a raised vent.
Models RR30NIS and RR30NIFS are compatible with Dacor raised vent models
ERV30 and ERV3015. Use only these specified raised vent models.
Available Backguards**
Part Number
Description
Compatibility
ADRB30E03
3 Inch
Optional on all models
ADRB30E06
6 Inch
Standard on models RR30NS, RR30NFS
Optional on models RR30NIS, RR30NIFS
ADRB30E09
9 Inch
Optional on all models
Dimension
RR30NS
RR30NFS
RR30NIS
RR30NIFS
A
46 1/4”
(117.5 cm)
46 1/16”
(117.0 cm)
C
25 1/2”
(64.8 cm)
25 5/16”
(64.3 cm)
D
23 3/8”
(59.4 cm)
23 3/16”
(58.9 cm)
Dimension
RR30NS
RR30NIS
B
27 7/8”
(70.8 cm)
27 11/16”
(70.3 cm)