Lexmark E352DN User Manual

The system board has one connector for an optional memory card.

Note: Memory options designed for other Lexmark printers may not work with your printer.

Access the system board (see Accessing the system board on page 28).

Push open the latches on both ends of the memory 
connector.

Unpack the memory card.

Memory is easily damaged by static electricity. 
Touch something metal, such as the printer 
frame, before you touch a memory card.

Avoid touching the connection points along the edge of the 
card.

Align the notches on the bottom of the card with the notches 
on the connector.

Push the memory card firmly into the connector until the 
latches on either end of the connector snap into place.

It may require some force to fully seat the card.

Make sure each latch fits over the notch on each end of the 
card.

Close the side access door.

Close the rear exit door.

Close the front door.

Plug the power cord into the wall outlet and turn the printer 
on to continue print functions.

If you are installing a memory card after setting up the printer, turn the printer off, and 

unplug the power cord from the wall outlet before continuing.