Jacuzzi j - 200 j - 230 User Manual

it. For optimum filtration benefits, always leave this valve in position A 

when the spa is covered and select positions B or C for maximum jet per-

formance during spa use.

Certain jet systems have their own air control. Each control  

introduces air into the water lines that supply that specific jet 

group. Simply turn the air control of choice counterclockwise 

to open or clockwise to close. To minimize heat loss, all air controls 

should be closed when the spa is not in use.

10.8  optional audio system (J-230 to J-280)

Spas equipped with the optional Jacuzzi audio system 

offer enhanced enjoyment. These models include 

an integrated AM/FM/CD receiver with high-quality marine speakers for 

unsurpassed sound quality and long-life.

The control system activates a programmable “Standard” or “Economy” 

filtration cycle to remove debris from your spa. These cycles use the low 

speed jets pump 1 and filter cartridge to quickly clear “skim” the water 

of debris and minimize their “bathtub ring” affect while the spa is in use 

or during a programmed filter cycle. Models equipped with the optional 

24-hour circulation pump offer the added benefit of 24-hour filtration for 

pennies a day! The circulation pump is not programmable. Apart from their 

filtration benefit, each filtration mode also effects the operation of the spa 

heater. Refer to Sections 11.1 and 11.2 for details.

Standard filtration/heating modes (F1-F3) are typically selected by 

customers in cold climates where heat up times are extended due to lower 

ambient temperatures. In either of these modes, the water temperature is 

regulated by the set temperature, low-speed jets pump 1 and heater which 

turns on as needed. After the programmed set temperature is reached, the 

heater and low speed pump turn off, only to turn back on during a heat call 

or during the next programmed filtration/heating cycle.
11.2 

Standard filtration/heating modes (F0-F3) are typically selected by 

customers in cold climates where heat up times are extended due 

to lower ambient temperatures. In either of these modes, the water 

temperature is regulated by the set temperature, 24-hour circulation 

pump and heater which turns on as needed. After the programmed set 

temperature is reached, the heater turns off and the circulation pump 

continues to operate 24-hours to filter and clean your spa.

28