Jacuzzi j - 200 j - 230 User Manual

Proper and regular maintenance of your spa will help it retain its beauty 

and performance. Your authorized Jacuzzi dealer can supply you with 

all the information, supplies, and accessory products you will need to 

accomplish this.

Keep hair, loose articles of clothing or hanging jewelry away from 

• 

suction fittings, rotating jets or other moving components to avoid 

entrapment that could lead to drowning or severe injury.

Never use the spa unless all suction guards, filter, filter lid, or skimmer 

• 

assembly are installed to prevent body and/or hair entrapment.

Never operate or use the spa if the filter, filter lid, or skimmer assembly 

• 

are broken or any part of the skimmer assembly is missing. Please 

contact your dealer or nearest service center for service.

The suction fittings and suction covers in this spa are sized to match 

• 

the specific water flow created by the pump(s). If it is necessary to 

replace the suction fittings, suction covers or pump(s), be sure that the 

flow rates are compatible and are in compliance with the VGB Safety 

Never replace a suction fitting or suction cover with one rated less 

• 

than the flow rate marked on the original suction fitting. Using improper 

suction fittings or suction covers can create a body or hair suction 

entrapment hazard that may lead to drowning or severe injury.

Owners must alert all spa users to the potential risk of Hair, Limb, 

• 

Body, Evisceration (disembowelment), and Mechanical Entrapment, 

page 6.

!

J-210 models: 

These model spas are equipped with a skimmer basket and filter 

cartridge located in the skimmer/filter well. Filtering is accomplished 

when jets pump #1 turns on in low speed initiating water flow through 

the skimmer basket and polyester mesh filter cartridge. As this happens, 

suspended particles become trapped on the filter’s surface.

1.  Turn off power to the spa at the home’s breaker panel or select the L1 

2.  Remove the filter strainer lid assembly.

3.  Remove the filter cartridge by rotating it counterclockwise to unthread it 

from the filter wall fitting, then lift it straight up to remove from filter well.

4.  Using a garden hose with a high-pressure nozzle, rinse debris from 

the filter pleats beginning at the top and working your way downward. 

Continue, one section at a time, until you have rinsed all of the filter’s 

pleats.

32