Jacuzzi j - 200 j - 280 User Manual

  

!

Water temperature is above acceptable limits. 

enTer spa! Water temperature has reached 112°F 

(44°C) and the low speed jets pump 1 and optional 

circulation pump (when equipped) has activated to circulate water 

through heater. Contact your authorized Jacuzzi dealer or qualified 

service technician.

  

!

Water temperature is above acceptable limits. 

enTer spa! The safety “Watchdog” software has been 

triggered and the spa is deactivated. A problem has been 

detected which could cause damage to the spa or its 

components. Contact your authorized Jacuzzi dealer or qualified service 

technician.

In the event your Jacuzzi spa is not working the way it should, please 

first review all the installation and operating instructions in this manual 

and check the message on the panel display. If you are still not satisfied 

it is working properly, please follow the appropriate troubleshooting 

instructions below. 

note: If any of the supply cords to the accessories are damaged, 

they must be replaced by authorized service personnel. Contact your 

authorized Jacuzzi dealer or qualified service technician.
15.1  none of the Components operate (e.g. Pump, light) 

Check the following:

Is there power to the spa?

1. 

Is the household circuit breaker tripped?

2. 

Contact your authorized Jacuzzi dealer or qualified service 

3. 

technician.

42