Volvo s70 User Manual
2000 Volvo S & V70
CAUTION:
· The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
· Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased or
lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it
impossible to fit the hub caps.
· The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
· Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased or
lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it
impossible to fit the hub caps.
WARNING!
· The jack (see the following page) must correctly engage the bar in the jack attachment (A). The car's
weight must not rest on the jack attachment (B).
· Be sure the jack is on a firm, level, non-slippery surface.
· Never allow any part of your body to be extended under a car supported by a jack.
· Use the jack intended for the car when replacing a wheel. For any other job, use stands to support
the side of the car being worked on. -
· Apply the parking brake, select position P (automatic transmission) or Reverse gear (manual
transmission).
· Block the wheels standing on the ground, use rigid wooden blocks or large stones.
· The jack should be kept well-greased.
· The jack (see the following page) must correctly engage the bar in the jack attachment (A). The car's
weight must not rest on the jack attachment (B).
· Be sure the jack is on a firm, level, non-slippery surface.
· Never allow any part of your body to be extended under a car supported by a jack.
· Use the jack intended for the car when replacing a wheel. For any other job, use stands to support
the side of the car being worked on. -
· Apply the parking brake, select position P (automatic transmission) or Reverse gear (manual
transmission).
· Block the wheels standing on the ground, use rigid wooden blocks or large stones.
· The jack should be kept well-greased.
pg. 95 Wheel changing
Jack attachment - front wheel drive models
Attaching the jack
There is a jack attachment located in the center on each side of the car. Position the jack on the bar in the
attachment and crank while simultaneously guiding the base of the jack to the ground. The base of the
jack must be flat on a level, firm, non-slippery surface. Before raising the car, check that the jack
is still correctly positioned in the attachment. Raise the vehicle until both wheels on the side of the car
attachment and crank while simultaneously guiding the base of the jack to the ground. The base of the
jack must be flat on a level, firm, non-slippery surface. Before raising the car, check that the jack
is still correctly positioned in the attachment. Raise the vehicle until both wheels on the side of the car
file:///K|/ownersdocs/2000/2000_SV70/00sv70_06.htm (3 of 22)12/30/2006 3:43:46 PM