peachtree-software peachtree complete accounting 7.0 Quick Setup Guide

If you are operating Peachtree on a Novell network and experience “Lock 
Table Full” errors, increase the maximum locks per connection on your 
network, then try the conversion process again. If this does not work or you 
are on a experiencing “Lock Table Full” errors on other networks when trying 
to convert data, copy your company data to a workstation and perform the 
operation directly on that workstation. When the process is complete, copy the 
data back to the network drive.

If you are unclear as to how to set the number of locks, refer to your network 
manual or see a network administrator. You can also visit the PeachFacts 
Technical Library at our Internet web site at http://www.peachtree.com for 
information correcting the error.

If you have an automatic backup routine enabled on your network and run 
the conversion or purge process overnight, you should disable this routine. It 
can be re-enabled after the purge or conversion process has completed.

If you still run into errors while converting existing data, consider 
examining technical tips and frequently-asked questions that Peachtree 
Software provides through our PeachFax (fax-on-demand) service and 
PeachFacts documents available at the Peachtree Software web site or contact 
Peachtree Software Client Support. For more information, see “Technical 
Support” on page 22.

Note