beiter wi User Manual
The WINDER
INSTRUCTIONS
Installing the spindle on
the Beiter Winder:
Watch the printed thread
indication on the side of the
Winder (pic.3).
Click in the spindle (pic.4
and 5) only after threading
the yarn through the rolls.
Clicking in the spool, pay
attention that the rim-edged
knobs are not too tight.
While threading the yarn
through the slot (pic. 6),
wrap it around your fingers
twice and pull it once firmly
into the slot.
If you want to remove the
yarn, pull it completely out
of the eye. Don't try to pull
it out of the slot!
the Beiter Winder:
Watch the printed thread
indication on the side of the
Winder (pic.3).
Click in the spindle (pic.4
and 5) only after threading
the yarn through the rolls.
Clicking in the spool, pay
attention that the rim-edged
knobs are not too tight.
While threading the yarn
through the slot (pic. 6),
wrap it around your fingers
twice and pull it once firmly
into the slot.
If you want to remove the
yarn, pull it completely out
of the eye. Don't try to pull
it out of the slot!
pic.1
pic.5
pic.2
pic.3
pic.6
pic.4
www.WernerBeiter.com
Tel. +49 7720 856860
Fax +49 7720 4238
email: info@wernerbeiter.com
Werner Beiter
Daimlerstr. 18
DE-78083 Dauchingen
Daimlerstr. 18
DE-78083 Dauchingen
Update 01/2004