eutech-instruments ecoscan con 5 conductivity & tds 5 tds meter User Manual

EcoScan CON 5 / TDS 5

3

The EcoScan CON 5/TDS 5 meter has 6 keys on its splash-proof keypad.
These comprise ON/OFF, HOLD/ENTER, CAL, MODE, 

∆

 and 

∇

 keys.

ON/OFF: Powers the meter on and turns it off. Meter directly enters
measurement mode when you switch it on.

MODE: Selects measurement mode for Conductivity/TDS or Temperature,

CAL: Allows calibration mode for Conductivity/TDS and Temperature, or to
abort calibration without confirming any set value.

HOLD: Freezes the measured reading for easy viewing.

ENTER: Confirms calibration value.

∆∆∆∆

∇

∇

∇

∇

 (DOWN): Scrolls up and down to the values during calibration.

The meter has a large custom LCD that consists of 3½-digit segments and
operation annunciators for uS/mS or ppm/ppt and 

o

C (Temperature). Other

annunciators include “HO” (when the HOLD function is activated) and “LO” (low
battery condition).

1.  To remove meter from rubber boot, push out from the bottom edges of

meter until it is completely out of boot. Ensure that the cables of
Conductivity electrode or temperature probe are not connected.

-1.8.8.8