eutech-instruments waterproof cyberscan pc 10 phconductivity meter User Manual

Instruction Manual 

PC 10 

- 9 - 

6.  Press the ENTER key to confirm temperature 

calibration.  The CON indicator will flash to 
confirm calibration.  

See Figure 13.  

To exit from Temperature Calibration mode without 
confirming calibration, DO NOT press ENTER in step 

6.  Press CAL/MEAS instead.  

Temperature calibration is restricted to ±5°C from 
the initial value displayed during calibration (shown 
in the secondary display).  

Since temperature readings affect the accuracy of the pH and conductivity measurements, it is 
strongly recommended to carry out pH and conductivity calibration after a temperature 
calibration is done.