eutech-instruments cyberscan con 10 conductivitytds meter User Manual

27

In the SETUP mode in CyberScan CON 100/200 meter, there are four main programs. Each

has been divided into several options. The programs and options are elaborated under the

following sections:

PROGRAM

DESCRIPITION

SECTION

1

Common functions

8.2

2

Instruments setup

8.3

3

TDS units and factor

8.4

4

Communication

parameters

8.5

To enter the SETUP mode, press the SET key from either the 

µ

S or ppm measurement MEAS

mode. The meter automatically enters Program 1, Option 0 (P1.0). The meter prompts you

with the program numbers in the secondary field of the display.

Selection of the ENTER/RANGE key confirms selection of the options chosen. The instrument

then automatically scrolls to the next program. Within each program, you can use MI/

!

 or

MR/

"

 key to make appropriate selections. There are some options that permit the viewing of

data and are useful for diagnostic purposes.

                   

                  

Ensure that the ENTER/RANGE key is pressed to confirm your option in each program.

To exit from the program after the confirmation of choice or to abort from the SETUP mode,

press the CAL/MEAS key to return to the MEAS mode.

                                    

     To exit SETUP