eutech-instruments ecoscan temp jkt temperature meter User Manual
1
1. INTRODUCTION
1.1 Introducing the Temp JKT
Thank you for purchasing the Temp JKT meter. This economical microprocessor-
based handheld meter works with type J, type K and type T probes for a wide
temperature measurement range:
based handheld meter works with type J, type K and type T probes for a wide
temperature measurement range:
• Type J probes (iron-constantan) offer a wide range of –200 to 1000 °C / -
328 to 1832
°F; use in reducing environments
• Type K probes (chromel-alumel) offer the widest range of –250 to 1372 °C
/ -418 to 2502
°F; use in oxidizing environments
• Type T probes (copper-constantan) of range of –250 to 400 °C / -418 to
752
°F; good for ambient and sub-freezing measurements
The Temp JKT meter features:
• Large LCD for clear and easy reading
• Readings
• Readings
in
o
C and
o
F (selectable)
• Minimum and maximum temperature display
• Minimum and maximum hold mode
• Low battery indicator
• Hold function, freezes measured reading
• User calibration - offset adjustment
• Built-in memory backup; calibration and other information remain if battery
• Minimum and maximum hold mode
• Low battery indicator
• Hold function, freezes measured reading
• User calibration - offset adjustment
• Built-in memory backup; calibration and other information remain if battery
is disconnected
This instruction manual is organized for quick reference with step-by-step
procedures that give you thorough review of the various features and meter
operations.
procedures that give you thorough review of the various features and meter
operations.
Included with your meter are a rubber boot, 4 alkaline “AAA” batteries, an
instruction manual and a warranty card. To order different type of thermocouple
probes, please refer to Section on Accessories for more information.
instruction manual and a warranty card. To order different type of thermocouple
probes, please refer to Section on Accessories for more information.