lawrence classic rope assembly User Manual
TOOLS REQUIRED:
• Phillips head screwdriver
• Latex gloves (Recommended)
• Latex gloves (Recommended)
INSTRUCTIONS:
Step 1
Pick up Rope with Wire Ring and Rope End.
Pick up Rope with Wire Ring and Rope End.
Step 2
Push Rope End Firmly onto Rope
Push Rope End Firmly onto Rope
Step 3
Place Rope End In Position Prior to Fastening.
Place Rope End In Position Prior to Fastening.
Step 4
Securely Fastened Rope End with 1.68"
Pointed Screw. Screw Captures
Crimped Wire Ring Preventing Rope
From Pulling out of Rope End.
Securely Fastened Rope End with 1.68"
Pointed Screw. Screw Captures
Crimped Wire Ring Preventing Rope
From Pulling out of Rope End.
Rope is now ready.
Classic Rope End Assembly
Step 1
Step 2
Step 4
Step 3
Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com
e-mail: service@lawrencemetal.com • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA