BBE Sound ars2 User Manual

1.  POWER CORD: USA configuration shown in illustration above.

FUSE: Replace ONLY with same type Fast-blow fuse.

USA, Canada and Japan models:  250Vac, 1/2A Fast-blow
Standard model: 250Vac, .125A Fast-blow

3.  INPUTS: The signal input to the BBE ARS is to be applied to the RCA jacks labeled “IN”,  Refer

to the “CONNECTIONS” pages for proper hook-up.

4. OUTPUTS: The signal output of the BBE ARS is to be taken from the RCA jacks labeled “OUT”.

Refer to the “CONNECTIONS” pages for proper hook-up.

4

(

0dBu = 0.775mVrms)

Frequency Response ……………………………………process on: program controlled

process off: DC to 20kHz

Absolute noise in process mode ………………………-90dBu below rated max output of 0dBu
THD in process mode …………………………………less than 0.1% @-10dBu level
Input Characteristics

Input Impedance ……………………………………50K Ohms
Nominal Input Level ………………………………-10dBu

Output Characteristics

Minimum load impedance for full output level ……1K Ohm
Nominal Output Level………………………………-10dBu
Maximum Output Level ……………………………+16dBu

Power Requirements

USA / Canada / Japan models………………………100-120Vac, 50/60Hz, 10 Watts
Standard model ……………………………………200-240Vac, 50/60Hz, 10 Watts

AC Line fuse protected…………………………………USA Model: 250Vac  1/2A Fast-blow fuse

Standard Model:  250Vac .125A Fast-blow fuse

Terminations/Connectors ………………………………Gold-plated RCA jacks
Dimensions ……………………………………………16.5"(W) x 8.5"(D) x 1.7"(H)

419mm(W) x 216mm(D) x 43mm(H)

Shipping Weight ………………………………………6.5 lbs.

Note:  Due to continuing product improvement, specifications and design are subject to change without notice.

FOR CONTINUED PROTEC-

TION AGAINST RISK OF FIRE, REPLACE
ONLY WITH SAME TYPE T63mA, 250V FUSE.

UTILISER UN

FUSIBLE DE RECHANGE DE
MEME TYPE DE T63mA, 250V.

RISQUE DE CHOC ELECTRIC 
NE PAS OUVRIR! 

▲

▲

;

®

full frequency focus

™

ARS