jazzmutant lemur User Manual
20
Once you’re finished, touch the Apply button. Your setting should look similar to this:
Now you will need to configure your computer’s network settings to work with this
address as follows. First we’ll talk about how to do this on Mac OS X, then on Windows
XP.
address as follows. First we’ll talk about how to do this on Mac OS X, then on Windows
XP.
Mac OS X Direct Configuration
These settings only apply to connecting your computer to your Lemur
directly with a single Ethernet cable. For other configurations (which we
recommend if you use a router), see the section below entitled Using a
Lemur in a Local Area Network.
directly with a single Ethernet cable. For other configurations (which we
recommend if you use a router), see the section below entitled Using a
Lemur in a Local Area Network.
• Open the Network Preferences panel by choosing Location -> Network Preferences…
from the Apple menu.
• Once the Network Preferences window appears, choose Built-in Ethernet from the
Show menu.
If Built-in Ethernet does not appear in the menu, choose Network Port
Configurations from the Show menu, and make sure Built-in Ethernet is
checked. If it is already checked, ensure that the cable is connected and the
Lemur is turned on. We will only need to be concerned with the TCP/IP
settings, which appear by default. You have two options for these
changing these settings.
Configurations from the Show menu, and make sure Built-in Ethernet is
checked. If it is already checked, ensure that the cable is connected and the
Lemur is turned on. We will only need to be concerned with the TCP/IP
settings, which appear by default. You have two options for these
changing these settings.