jazzmutant lemur User Manual
26
If the Lemur talks successfully to the DHCP server in your router, you should see it
display its DHCP-assigned IP address as well as the Gateway address of the router itself,
such as this:
display its DHCP-assigned IP address as well as the Gateway address of the router itself,
such as this:
Assuming the DHCP configuration was successful, the Lemur should now be on the same
network as your computer.
network as your computer.
Using a Switch or Hub
In this scenario, your computer is connected to an Ethernet switch or hub, and you would
like to connect the Lemur to this same switch or hub.
like to connect the Lemur to this same switch or hub.
If your switch or hub is connected to a router using DHCP, your
configuration is essentially identical to the router case described above.
Both your computer and the Lemur will be assigned IP addresses by the
DHCP server in the router.
configuration is essentially identical to the router case described above.
Both your computer and the Lemur will be assigned IP addresses by the
DHCP server in the router.
If your computer is not connected to a router, or uses a static IP address, then you will
need to modify the TCP/IP settings for your Ethernet connection to match those of the
Lemur as described under the section entitled Connecting a Lemur Directly to Your
Computer above.
need to modify the TCP/IP settings for your Ethernet connection to match those of the
Lemur as described under the section entitled Connecting a Lemur Directly to Your
Computer above.
Now that we’ve established a network configuration, its time to fire up the JazzEditor
and get it talking to your Lemur.
and get it talking to your Lemur.
Installing the JazzEditor Software
The Lemur requires no special drivers, so once you copy the JazzEditor application,
you’ll be ready to work with the unit on your computer.
you’ll be ready to work with the unit on your computer.