jazzmutant lemur User Manual
30
• Before you get too excited and click the Connect button, you need to select the
desired Lemur by clicking on its IP address as shown here:
You can either double-click the IP address of the Lemur, or click it once and then click the
Connect button.
Connect button.
If the connection is successful, the Connection window will disappear and the icon at the
top of the main window will change to Disconnect as shown below.
top of the main window will change to Disconnect as shown below.
If you get an error attempting to connect, first just try it again. Sometimes the connection
process will fail the first time when using a wireless connection. If the connection attempt
fails the second time, try turning your Lemur off, waiting a few seconds, and turning it on
again. After it starts up, its IP address should reappear in the list in the connection
window.
process will fail the first time when using a wireless connection. If the connection attempt
fails the second time, try turning your Lemur off, waiting a few seconds, and turning it on
again. After it starts up, its IP address should reappear in the list in the connection
window.
If you’re connected, it’s time to learn about the JazzEditor and designing Lemur
interfaces.
interfaces.
Your Lemur is now connected to your computer but it is not yet ready to
talk to OpenSoundControl applications. If you plan to use the Lemur with
an OSC application such as Max/MSP or Reaktor, please refer to chapter
"Using the Lemur with Open Sound Control Applications" for further
information on setting up your computer's IP address as the Lemur's
Target IP. If you are planning to use the Lemur with software that is
controlled via MIDI, you do not need to set up the Lemur's Target IP.
talk to OpenSoundControl applications. If you plan to use the Lemur with
an OSC application such as Max/MSP or Reaktor, please refer to chapter
"Using the Lemur with Open Sound Control Applications" for further
information on setting up your computer's IP address as the Lemur's
Target IP. If you are planning to use the Lemur with software that is
controlled via MIDI, you do not need to set up the Lemur's Target IP.