husky-liners 2079 User Manual

2079.DOC

Rev: 0

01/26/01

CARE AND USE INSTRUCTIONS

     Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not

completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back

of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain

flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.

     Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.

The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409

®

 or Glass Plus

®

 work

well. Use of Armor All

®

, Son-of-a-Gun

®

 or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR DODGE

DURANGO CARGO LINER

TO ACCESS THE FACTORY CARGO TIE-DOWN HOOKS WITH YOUR CARGO LINER IN PLACE,
MAKE A SLIT THROUGH THE RAISED AREAS DIRECTLY ABOVE THE CARGO HOOKS ON YOUR
LINER (SHOWN ABOVE DARKENED). THEN PULL THE HOOKS UP THROUGH THE LINER. A
UTILITY KNIFE WORKS WELL.

FRONT OF VEHICLE