Becker traffic pro 7949 Operating Guide
95
Settings
Setting the system language
You can select the language for
announcements and displays here.
You can select the language for
announcements and displays here.
X
Select
6HWV\VWHPODQJXDJH
in the voice
mode settings.
X
Turn the rotary control/push button
and then press the rotary control/push
button to select the required language.
and then press the rotary control/push
button to select the required language.
The speaker selection list appears.
X
Turn the rotary control/push button
and then press the rotary control/push
button to select the required speaker.
and then press the rotary control/push
button to select the required speaker.
The language and the selected speaker
are installed.
are installed.
Displaying voice settings
This function can be used to display the
currently valid voice settings.
This function can be used to display the
currently valid voice settings.
X
Select
6KRZVHWWLQJV
in the voice mode
settings.
The voice settings are displayed.
•
00, ODQJXDJH
indicates the current
setting for the display text language.
•
1DYL VSHDNHU
indicates the current set-
ting for the navigation announcement
speaker.
speaker.
•
6'6
indicates the current setting for
the voice dialogue system speaker.
•
776
indicates the current language
setting for reading out texts.
Notes:
• The navigation CD or system CD
must be inserted in order to change
the language or speaker. If necessary,
the Traffic Pro will prompt you to
insert the navigation CD/system CD.
the language or speaker. If necessary,
the Traffic Pro will prompt you to
insert the navigation CD/system CD.
• It may take up to 10 minutes to install
the language.
• When the system language changes,
voice entries created for stations and
addresses are deleted.
addresses are deleted.
7004
Note:
To update the voice dialogue, you may
be prompted to insert the system CD. If
you are, insert it.
be prompted to insert the system CD. If
you are, insert it.
7005
7006