husky-liners 3401 User Manual
3401.doc
12/22/2004
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your
new floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR SUBARU
OUTBACK/LEGACY
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
TO EASE ACCESS TO THE FUEL DOOR RELEASE LEVER WITH YOUR LINER IN PLACE, SIMPLY TRIM
AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR DRIVER’S SIDE LINER (AREA SHOWN
DARKENED ABOVE). A UTILITY KNIFE WORKS WELL FOR TRIMMING. YOU CAN AVOID TRIMMING
BY JUST LIFTING THE LINER UP TO ACCESS THE RELEASE LEVER.
AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR DRIVER’S SIDE LINER (AREA SHOWN
DARKENED ABOVE). A UTILITY KNIFE WORKS WELL FOR TRIMMING. YOU CAN AVOID TRIMMING
BY JUST LIFTING THE LINER UP TO ACCESS THE RELEASE LEVER.