husky-liners 2053 User Manual

Page of 2
2053 Front_Back.doc
12/1/2006
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
      Your  new  liner  is  custom  molded  to  fit  your  vehicle.  Upon  removal  from  the  box  your  liner  will  not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
      Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
 or Glass Plus
®
 work
well. Use of Armor All
®
, Son-of-a-Gun
®
 or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR JEEP
WRANGLER UNLIMITED CARGO LINER
NOTICE:  IF  YOUR  WRANGLER  UNLIMITED  HAS  THE
OPTIONAL  INFINITI  SOUND  SYSTEM,  IT  HAS  A  SUB-
WOOFER  MOUNTED  ALONG  THE  PASSENGER  SIDE
WALL  IN  THE  CARGO  AREA.  THIS  SUB-WOOFER  WILL
KEEP  PART  #2053  FROM  FITTING  AS  IT  WAS  BOXED.
HOWEVER, YOUR LINER CAN EASILY BE TRIMMED TO
ACCOMMODATE THIS FEATURE. TO TRIM, CUT ALONG
THE  EDGE  OF  THE  MOLDED  STEP  THAT  RUNS  ALONG
THE  RAISED  RIDGE  IN  THE  PART.  TRIMMING  WILL
LEAVE A _” LIP ALONG THE WALL (SEE BACK OF PAGE
FOR TRIMMING PHOTO).
.