husky-liners 6315fr User Manual

Page of 2
6315FR~1.DOC
Rev: 0
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
     Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the
place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before
installing your new floor liner. However, do not remove the factory-installed carpeting.
     Your liner is made from an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
 or Glass
Plus
®
 work well. Use of Armor All
®
, Son-of-a-Gun
®
 or similar items is discouraged as these products
make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD
ESCAPE/MAZDA TRIBUTE SECOND SEAT FLOOR LINER
THE FORD ESCAPE AND MAZDA TRIBUTE COME EQUIPPED WITH TWO STYLES OF
CENTER CONSOLES (SEE PHOTOS ON BACK). YOUR HUSKY LINER WILL
ACCOMMODATE BOTH CONSOLE STYLES BUT SOME TRIMMING MAY BE REQUIRED.
TEST FIT YOUR LINER TO DETERMINE IF YOUR LINER NEEDS TRIMMED. IF TRIMMING IS
NECESSARY, IT IS EASILY DONE BY TRIMMING ALONG THE INSIDE THE RAISED BAND
ON OF THE LINER (SEE ABOVE). AN ADDITIONAL TRIM AREA IS PROVIDED TO
ACCOMMODATE THE POWER SEAT TRACK MOVEMENT ON THE OPTIONAL DRIVER’S
SIDE POWER SEAT (CIRCLED ABOVE). TRIM THE RECESSED PORTION OF THE WALL
AWAY USING A UTILITY KNIFE OR HEAVY SHEARS. ADDITIONAL PHOTOS ARE
INCLUDED ON THE BACK OF THIS INSTRUCTION SHEET TO AID IN TRIMMING.
FRONT OF VEHICLE