giant-bicycles l il giant tricycle 10 and 12 User Manual

nut incrementally until it does. If the wheel spins freely but rattles or wobbles
on the axle, tighten the nut until the wheel spins true.

Repeat the wheel installation procedure for the second rear wheel.

STEP #4 – Install the Saddle and Clamp Assembly

a) Install the Saddle and Clamp Assembly (item# 5) by sliding it onto the saddle-

mounting spur on the frame. Be careful not to gouge the paint.

b) The fore/aft position of the saddle can be adjusted by sliding the Saddle and

Clamp Assembly along the saddle-mounting spur. In addition, the angle of the
saddle can also be adjusted. Once the desired saddle adjustment is made – using
a 6mm hex wrench – tighten bolt on the Clamp Assembly securely.

Now you’re ready to ride!