Becker 7802 dtm updatecd1 2 User Manual

Subject to errors and technical modifications

17

Copyright by Becker GmbH, D-76303 Karlsbad

The destination can also be selected via the town’s post code.

Select the destination’s 

! 

 by turning the right ro-

tary control

 and press to confirm the selection.

Using the right rotary control 

, enter the post code for the

destination and press for more than 2 seconds to confirm the
entry. To confirm, the small tick

 can also be selected and

the right rotary control

 briefly pressed. 

The display then shows either the destination corresponding
to the post code or, if the post code is shared among several
towns, a list containing these towns.

Select the required location using the right rotary control 
and press to confirm.
If more than 20 locations share the same post code, the dis-
play will show the location input menu instead of the above-

mentioned list. In that case, the location name is to be entered
as described in „Entering the destination“. 
The program returns to road or centre entry. If there are no
streets in the selected town or only the centre can be selected,
the unit will switch directly to the route menu.

If the geographical coordinates (latitude and longitude) of a
destination are known, these can be entered and route
guidance to the destination started.

To enter the coordinates of the destination, select

! 

 by turning the right-hand rotary control 

.

Press to confirm the selection.

Enter the latitude of the destination using the right-hand
rotary control 

. Entries must be made in degrees, minutes,

seconds and a direction as the crow flies, e.g. 

11°38’34

[[ N

.

To confirm the entry, press and hold the right-hand rotary
control

 for more than 2 seconds. To confirm, the small

tick

 can also be selected and the right-hand rotary

control

 pressed briefly. 

!

        

! 

!P

YY !"Y$Y&'

YYYYYYYYYYYYYYYYYYYYY

      

"

!

          

&

!!"P
YYYYYYYYYYYYYYYYYYYYYYYYYYY

YYY

YYYYYY